(request for new user)
(request for new user)
Advanced encryption hardware module. Cryptographic coprocessor with hardware-based secure key storage and hardware support for asymmetric signature, verification, key agreement and symmetric algorithms.
Display RGB 5” 800×480, pcap touch with coverglass, connection cables/adapter and mounting frame to Novasom board. For Novasom U excluding board.
Display RGB 5” 800×480, RES touch with openframe, connection cables/adapter and mounting frame to Novasom board. For Novasom U excluding board.
Display RGB 7” 800×480, pcap touch with coverglass, connection cables/adapter and mounting frame to Novasom board. For Novasom U excluding board.
Display RGB 7′ 800×480, RES touch with openframe, connection cables/adapter and mounting frame to Novasom board. For Novasom U excluding board.
Display LVDS 7” 1024×600, pcap touch with coverglass, connection cables/adapter and mounting frame to Novasom board. For Novasom P excluding board.
Display LVDS 7” 1024×600, pcap touch with openframe, connection cables/adapter and mounting frame to Novasom board. For Novasom P excluding board.
Display LVDS 10.1” 1280×800, pcap touch with coverglass, connection cables/adapter and mounting frame to Novasom board. For Novasom P excluding board.
Display RGB 5” 800×480, pcap touch with coverglass.
Display RGB 5” 800×480, RES touch.
Display RGB 7” 800×480, pcap touch with coverglass.
Display RGB 7” 800×480, RES touch.
Display LVDS 7” 1024×600, pcap touch with coverglass.
Display LVDS 7” 1024×600, pcap touch.
Display LVDS 10.1” 1280×800, pcap touch with coverglass.
Display HDMI 7” 1024×600, pcap touch with coverglass.
Display HDMI 10.1” 1280×800, pcap touch with coverglass.
For FFC/wire Video + PCAP – FPC/wire 6 pin step 0,5. Used for 7″ LVDS display in combination with cable N.CAB-P-LVDS20_24-150617-00 (for P-line) or NI240613-FS61-01 (for S-line).
For PCAP I2C – FPC/wire 6 pin step 0,5. Used in combination with cable NI150316-FS14-01 (for P-line) or standard FPC 6 pin step 0,5mm (for U-line).
For Touch RES – FPC/wire 4 pin step 1 with electronics onboard converting the signal to I2C. Used in combination with cable NI150316-FS14-01 (for P-line) or standard FPC 6 pin step 0,5mm (for U-line).
For PCAP USB – FPC/wire 4 pin step 1. Used in combination with cable NI150316-FS14-01 (for P-line).
Cable FFC 6 POS 0.5 MM 3″ for the adapters N.ADA-1X-050517-00 to P-line board.
video & touch 7″ PCAP cable for S line SBC.
video & touch 7″ PCAP cable for P line SBC.
mPCIe module for WI-FI with one UFL onnector for remote antenna, 150Mbps.
mPCIe module for WI-FI with two UFL onnectors for remote antennas, 300Mbps
dipole antenna, panel mounted, 16dBi with 100mm antenna cable
dipole antenna, panel mounted, 6dBi with 100mm antenna cable
15 W module standard temp range (0°C; +70°C)
30 W module standard temp range (0°C; +70°C)
15 W module extended temp range (-40°C; +85°C)
An instrument through a graphical interface, allows you to configure the linux kernel in a simple and intuitive thus optimizing the performance of the card.
Federal ID Number 811523802
VAT RO36203804
R.C. N. J40/8303/14.06.2016